|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Document 625-1 Air Core Inductors These parts have the lowest DCR and highest current ratings of our air-core inductors. Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com. Part number1 GA3092-AL_ GA3093-AL_ GA3094-AL_ GA3095-AL_ Inductance2 5% (nH) 3.7 6.6 12.0 17.5 Q2 typ 120 107 105 115 SRF typ3 (GHz) 17.5 5.8 2.4 2.2 DCR max4 Irms5 Wt (mOhm) (A) (mg) 2.0 2.0 2.0 2.0 7.0 7.0 7.0 7.0 150 220 280 390 Terminations RoHS compliant tin-silver over copper Ambient temperature -40C to +125C with Irms current, +125C to +140C with derated current Storage temperature Component: -40C to +140C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Mean Time Between Failures (MTBF) 1 billion hours Packaging 250/7reel; 1000/13 reel Plastic tape: 16 mm wide, 0.35 mm thick, 12 mm pocket spacing, 4.9 mm pocket depth PCB washing Only pure water or alcohol recommended 1. When ordering, please pecify packaging code: GA3095-ALC Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). Factory order only, not stocked. 2. L and Q measured at 150 MHz, 0.1 Vrms, 0 A using an Agilent/HP 4291A impedance analyzer with an Agilent/HP 16193A test fixture. 3. SRF measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD-D test fixture. 4. DCR measured using a micro-ohmmeter. 5. Current that causes a 15C temperature rise from 25C ambient. 6. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Specifications subject to change without notice. Please check our website for latest information. Document 625-1 Revised 03/06/09 (c) Coilcraft, Inc. 2009 Document 625-2 Air Core Inductors L vs Frequency 25 20 17.5 nH Q vs Frequency 250 200 3.7 nH Inductance 15 12.0 nH 6.6 nH 5 0 1 10 100 1000 10000 3.7 nH Q factor 150 17.5 nH 100 6.6 nH 12.0 nH 10 50 0 1 10 100 1000 10000 Frequency (MHz) Frequency (MHz) Irms Derating 120 110 Percent of rated Irms 100 90 80 70 60 50 40 20 10 0 -40 -20 0 20 40 60 80 100 120 140 25C 30 Ambient temperature (C) GA3092-AL GA3093-AL GA3094-AL GA3095-AL 0.20 max 5,08 0.20 max 5,08 0.20 max 5,08 0.20 max 5,08 0.19 max 4,83 0.19 max 4,83 0.19 max 4,83 0.22 max 5,59 0.21 max 5,33 0.23 5,84 0.23 5,84 0.23 5,84 0.23 5,84 135 max 45 min 0.060 1,524 0.205 5,207 0.205 5,207 0.060 1,524 0.205 5,207 0.060 1,524 0.235 5,969 0.060 1,524 Dimensions are in inches mm Recommended Land Patterns Specifications subject to change without notice. Please check our website for latest information. Soldered lead length Document 625-2 Revised 03/06/09 (c) Coilcraft, Inc. 2009 |
Price & Availability of GA3092-AL |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |